New cooker installation
Safe installation and testing for new domestic gas cookers.
GAS SAFE COOKER & HOB INSTALLATION · NOTTINGHAM
Safe, professional gas cooker and gas hob installation.
Progas Heating and Plumbing Services Ltd installs, replaces and disconnects domestic gas cookers and hobs across Nottingham. Every installation includes appropriate connection, appliance and safety checks by a qualified Gas Safe engineer.
Gas Safe engineer
Gas cooker installation
Gas hob installation
Connection & safety checks
LOCAL GAS-APPLIANCE INSTALLATION
Connected correctly, checked carefully and ready to use.
Gas cooker installation is the safe fitting, connection and testing of a gas cooking appliance. It should only be completed by an appropriately qualified Gas Safe registered engineer.
Whether you are replacing an old cooker, fitting a new gas hob, moving into a new home or upgrading your kitchen, we inspect the appliance, connection point and relevant visible pipework before completing the work.
WHAT WE CAN HELP WITH
Gas cooker and gas-hob services for your kitchen.
Gas hob installation
Connection and testing for new or replacement gas hobs.
Cooker replacement
Safe removal of the old appliance and fitting of the replacement.
Old cooker disconnection
Professional disconnection before replacement, renovation or kitchen changes.
Pipework checks
Visible gas-pipework and connection-point checks before installation.
Safety testing
Leak checks, burner testing and practical safety guidance after fitting.
GAS SAFETY COMES FIRST
Gas appliances are not a DIY installation job.
Incorrect installation can create serious safety risks, including gas leaks, poor combustion, unsafe flame performance and appliance faults. A qualified engineer does more than connect an appliance—they check the connection, pipework, flames and safe operation.
Correct gas connectionVisible pipework inspection
Leak testingBurner and flame testing
Ventilation and clearance checksClear customer handover
WHEN YOU NEED A FITTER
Common reasons to call a Gas Safe engineer.
GAS HOB INSTALLATION
Safe connection for new and replacement hobs.
Built-in hobs need a suitable connection, correct installation space and final burner testing. We can inspect the setup and complete the gas work safely.
KITCHEN UPGRADES
Plan the gas connection as part of the wider project.
New worktops, appliance relocation, hob upgrades and kitchen layout changes can all affect how a gas appliance is installed.
COOKER REPLACEMENT
Replacing an appliance is more than swapping one unit for another.
Old appliance disconnection
We disconnect the existing cooker safely before the new appliance is fitted.
Connection-point check
We inspect the existing point and relevant visible pipework.
New appliance connection
The cooker or hob is fitted using the appropriate connection method.
Final testing
We check for leaks, test burners and confirm safe operation before handover.
INSTALLATION CHECKS
What a careful gas-cooker installation can include.
Appliance and site check
Checking the appliance, installation space and existing connection point.
Pipework inspection
Reviewing visible fittings and pipework before gas-appliance work begins.
Connection assessment
Confirming the connection approach is suitable for the appliance and property.
Ventilation and clearance
Checking visible space and ventilation considerations around the appliance.
Leak testing
Testing relevant gas connections after installation is complete.
Burner and flame testing
Checking burner ignition and flame performance before the appliance is used.
Safety advice
Providing practical guidance on basic safe operation and next steps.
Smell gas near your cooker or hob?
Do not use the appliance. Turn off the gas supply only if safe, open windows, avoid flames and electrical switches, then call the National Gas Emergency Service on 0800 111 999.
WARNING SIGNS
Contact a Gas Safe engineer if you notice:
A smell of gas near the applianceWeak, yellow or uneven flames
Burners that fail to light or stay litClicking ignition with no proper flame
A damaged hose, fitting or connectionA cooker that has been disconnected or capped off
Kitchen changes affecting the gas pointAny uncertainty about appliance safety
LANDLORDS & PROPERTY MANAGERS
Safe gas-cooking appliances for rental homes.
Where a rental property includes a gas cooker or hob, it must be safe for tenants to use. Progas can assist with installation, replacement, disconnection, visible pipework checks and related gas-safety support.
We can also help during changeovers, kitchen upgrades and planned appliance replacements between tenancies.
INSTALLATION OR APPLIANCE REPAIR?
Two different types of gas-appliance work.
Installation means fitting, connecting or replacing a cooker or hob safely.
Appliance repair means addressing a fault inside the cooker itself, such as internal ignition or burner defects. In some situations, this may require manufacturer or specialist appliance-repair support.
WHY PROGAS
Careful gas-appliance work with clear advice.
Gas Safe registered engineering
Cooker and hob installation support
Replacement and safe disconnection
Pipework, connection and safety checks
Local Nottingham service
24/7 support for urgent gas concerns
OUR INSTALLATION PROCESS
Simple, safe and easy to follow.
Tell us about the appliance
Let us know whether it is a new installation, replacement, disconnection or kitchen-upgrade project.
Basic details checked
We clarify the appliance type, property location and relevant setup details.
Engineer visit
A Gas Safe engineer attends to inspect the appliance and connection area.
Safe installation
The cooker or hob is connected using the suitable method for the property.
Testing and checks
We check for leaks, test burners and confirm safe operation.
Customer handover
We explain the completed work and provide basic safety guidance.
GAS COOKER INSTALLATION IN NOTTINGHAM
Need a cooker or hob connected safely?
Progas Heating and Plumbing Services Ltd is based at 313 Perry Road, Nottingham NG5 1GQ.
Speak to Progas
+44 7503 726428
info@progasheatingandplumbingservicesltd.com
313 Perry Road, Nottingham NG5 1GQ
GAS COOKER INSTALLATION FAQs
Common questions
Do I need a Gas Safe engineer to install a gas cooker?
Yes. Gas cookers, hobs and ovens should be installed by an appropriately qualified Gas Safe registered engineer.
Can you install a gas hob?
Yes. We can assist with installation and replacement of domestic gas hobs, subject to a suitable appliance and property setup.
Can you disconnect my old gas cooker?
Yes. We can disconnect an existing cooker safely before a replacement or kitchen project.
What is checked during installation?
Checks can include the appliance, connection point, visible pipework, clearance, ventilation, leak testing and burner operation.
What should I do if I smell gas?
Do not use the appliance. Open windows, avoid electrical switches and flames, and call the National Gas Emergency Service on 0800 111 999.