Active gas smell or suspected live leak?

Open doors and windows, avoid flames and electrical switches, leave the property if needed, then call the National Gas Emergency Service immediately on 0800 111 999. Do not wait for a private repair appointment.

EMERGENCY GAS ESCAPE REPAIRS · NOTTINGHAM

Urgent follow-up gas repair support from Gas Safe engineers.

Once the emergency service has made the property safe, Progas Heating and Plumbing Services Ltd can inspect and repair suitable gas pipework, appliance connections, boiler-related gas faults and cooker or hob connection issues.

Call Progas +44 7503 726428 →
Emergency gas escape repair by Progas
Gas Safe registered engineering Post-emergency repairs Gas pipework support 24/7 urgent assistance

WHAT IS EMERGENCY GAS ESCAPE REPAIR?

Making safe and repairing identified gas-related faults.

Emergency gas escape repair is the repair of a gas-related fault after a suspected or confirmed gas leak has been identified and the property has been made safe. The issue may involve internal pipework, fittings, valves, boiler connections, cookers, hobs or another domestic gas appliance.

Gas work must never be treated as DIY. We inspect the affected installation, explain the fault and only carry out repair work where it is safe and appropriate.

WHAT TO DO FIRST

Follow emergency gas-safety steps before seeking repair.

1

Ventilate

Open doors and windows if safe to do so.

2

Avoid ignition

Do not smoke, use flames or operate electrical switches.

3

Turn off gas if safe

Use the emergency control valve only if safe and you know how.

4

Call 0800 111 999

Contact the National Gas Emergency Service immediately.

WHEN FOLLOW-UP REPAIR MAY BE NEEDED

Arrange a Gas Safe repair inspection after the emergency is controlled.

The emergency service has turned off the gas supply A gas leak has been identified after the meter You were advised to contact a Gas Safe engineer A boiler has been isolated due to a gas concern A cooker or hob has been disconnected A gas pipe or fitting is damaged A landlord gas-safety check has found a fault You need follow-up work after an emergency callout

COMMON CAUSES

Gas escapes can be linked to pipework, fittings or appliances.

Pipework damage

Damaged, corroded or disturbed internal gas pipework may need urgent professional attention.

Loose fittings or joints

Connections, valves and fittings can become damaged, worn or unsuitable over time.

Appliance connection faults

Boilers, cookers and hobs can develop concerns around their gas connection points.

Unsafe previous work

Poor installation, accidental damage or incorrectly capped supplies can create safety concerns.

OUR SAFETY-FIRST APPROACH

What suitable follow-up gas repair can involve.

The scope depends on the source of the fault, the condition of the installation and whether the supply has already been isolated.

01

Initial safety confirmation

Confirming that active emergency safety steps have already been completed.

02

Gas-system inspection

Inspecting the relevant pipework, appliance connection, fitting or valve.

03

Pipework repair advice

Explaining suitable repair or replacement where internal pipework is affected.

04

Appliance-connection repair

Assessing gas connections around boilers, cookers and hobs.

05

Isolation or capping advice

Explaining when an appliance or pipe section must remain isolated until repaired.

06

Testing after repair

Completing suitable checks before advising that repaired areas are safe to use.

07

Clear handover

Explaining the fault, completed work and any future safety recommendations.

AFTER THE EMERGENCY SERVICE ATTENDS

Do not turn the gas back on yourself.

The emergency service may isolate the supply, cap part of the installation or advise that a Gas Safe engineer is required. Progas can help determine why this happened and explain what needs to be repaired before normal gas use can resume.

Why the supply was turned offWhich appliance is affected Whether a fault is after the meterWhether repair work is required Whether the connection is unsafeWhat is needed before normal use
Boiler gas connection repair

BOILER GAS CONNECTIONS

Inspection and appropriate repair support around boilers.

A boiler-related concern may involve the gas connection, nearby pipework, valves or fittings. We inspect the affected area and explain the safest next step.

Gas cooker and hob repair support

COOKERS & HOBS

Safe follow-up support for gas-appliance connections.

If a cooker or hob connection is unsafe, the appliance may need to remain disconnected until the appropriate repair or replacement is completed.

Gas pipework inspection

GAS PIPEWORK REPAIRS

Damaged or unsafe gas pipework needs qualified attention.

Internal gas pipework must be secure, correctly fitted and safe. We can inspect suitable faults involving damaged pipe sections, loose fittings, corrosion, unsafe capped pipes or pipework affected by building work.

If building or DIY work has disturbed a gas pipe, call 0800 111 999 first.

LANDLORDS & PROPERTY MANAGERS

Qualified support when a tenant reports a gas concern.

Landlords should act quickly when a tenant reports a gas smell or an appliance is made unsafe. After emergency steps have been followed, Progas can support follow-up inspection, gas-pipework repairs, appliance checks, CP12-related work and clear repair recommendations.

Prompt action helps protect tenants and supports a safe rental property.

Gas escape finding

This identifies the likely source of a suspected leak or unsafe gas concern after the emergency situation is safe.

Emergency gas escape repair

This addresses the identified fault through suitable repair work once it is safe for a qualified engineer to proceed.

OUR REPAIR PROCESS

Safety first, then a clear route to repair.

1

Emergency safety first

For an active gas smell, call 0800 111 999 before contacting Progas.

2

Explain what happened

Tell us whether the supply was isolated or an appliance was disconnected.

3

Engineer inspection

A Gas Safe engineer checks the affected pipework, fitting or appliance connection.

4

Clear diagnosis

We explain the fault and the appropriate repair route.

5

Safe repair work

Where suitable, agreed gas repair work is completed carefully.

6

Testing and handover

We complete appropriate checks and explain what was repaired.

WHY PROGAS

Gas-safety support with clear communication throughout.

Gas Safe registered engineers Safety-first emergency guidance Gas pipework, boiler and cooker knowledge Clear advice before repair work begins Support for homes, landlords and agents Local Nottingham coverage

EMERGENCY GAS REPAIR FOLLOW-UP IN NOTTINGHAM

For an active gas smell, call 0800 111 999 first.

Once the emergency is controlled, contact Progas Heating and Plumbing Services Ltd for suitable Gas Safe follow-up support.

Speak to Progas +44 7503 726428 info@progasheatingandplumbingservicesltd.com 313 Perry Road, Nottingham NG5 1GQ

EMERGENCY GAS ESCAPE REPAIR FAQs

Common questions

What should I do if I smell gas?

Open doors and windows, avoid flames and electrical switches, leave if necessary and call the National Gas Emergency Service on 0800 111 999 immediately.

Should I call Progas before 0800 111 999?

No. For an active gas smell or suspected live leak, call 0800 111 999 first. Contact Progas after the property has been made safe.

What happens if my gas supply has been turned off?

Do not turn it back on yourself. A Gas Safe engineer may need to inspect the system and complete required repairs before gas can safely be used again.

Can you repair gas pipework?

We can inspect and repair suitable domestic gas-pipework faults where it is safe and appropriate to do so.

Is gas escape finding the same as emergency gas repair?

No. Finding identifies the likely source of the issue; repair addresses the identified fault after the situation is safe.